Applicable for family: 8 local controls Identification on uP: /R217
Hotel Mode activation: Select program 38, then press "INSTALL" on local keyboard and "SLEEPTIMER" on remote control for at least 4 seconds (at activation a green "H" is displayed (to remove this "H" switch off/on the set)).
Specification of the Hotel mode: Max. volume in hotel mode is the volume present when activating the hotel mode. STORE or INSTALL can not be entered.
Hotel mode (de)activation for Anubis A with 3 local controls. Only for sets with 3 LOCAL CONTROLS
In service information HOTEL MODE for GR1AX / Anubis A&B / TV/VCR-1 4822 727 20384 a mistake is made for activation and de-activation of the Anubis A with 3 local controls (microprocessor version-3146)
For hotel mode activation of a 3 local control Anubis A after selecting program 38, the "SELECT" button on the local keyboard and the "SLEEPTIMER" button on the remote control should be pressed simultaniously for at least 4 seconds.
For de-activation of the hotel mode execute above mentioned procedure once again.
notice:
https://www.p4c.philips.com/cgi-bin/...is_no=&x=9&y=9

